 |
 |
 |
 |
 |
The requirements for balances and scales in specialty applications has changed over the years and A&D Weighing has modified the GF Series Laboratory Balance Series to meet the needs of the pharmacopoeia field. The GF-P Series Prescription Balances offer the same reliability as the GF-Series Lab Balance with additional embedded software conforming to US National Conference on Weighing & Measurement requirements for Class II balances - certified for both Weighing and Pill Counting for prescription filling. A&D offers an extensive line of pharmacy weighing solutions which comply with most Federal, State and local USP Regulations.
Pharmacist looking for our lowest cost Class A prescription balance that is NTEP approved and legal for trade to meet the requirement for their pharmacy license should review the AND FX300iN. The FX300iN meets the requirements for a Class A prescription balance having a sensitivity of 6 mg.
Compounding prescriptions are achieved through an essential triad relationship patient, physician and pharmacist. The physician first prescribes the medication, then the pharmacist takes the necessary ingredients, compounds them, and dispenses the medicine to the patient after a thorough consultation. This enables patients to receive the type of personalized care they deserve and allows pharmacists the opportunity to provide superior, patient-oriented services. |
|
 |
|
 |
|
 |
|
Page 1 of 2  |
 A&D Weighing GF-200P Pharmacy Balance |
Capacity: 210g Readability: 0.001g
|
MSRP:$1385.00 Your_Price:$1066.00
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
|
WEIGH MODES:
- Pounds
- Ounces
- Grams
- Troy Ounces
|
GF-200P pharmacy scale offers the same reliability as the GF-200
lab balance with additional embedded software conforming to US National
Conference on Weighing & Measurement requirements for Class II balances
- certified for both Weighing and Pill Counting for prescription filling.
A&D offers an extensive line of pharmacy weighing solutions which comply
with most Federal, State and local USP Regulations.
[Read More ....] |
 |
 A&D Weighing GF300P Prescription Scale |
Capacity: 310g Readability: 0.001g
|
MSRP:$1650.00 Your_Price:$1237.50
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Pounds
- Ounces
- Grams
- Troy Ounces
|
GF-300P prescription balance offers the same reliability as the GF300 laboratory balance with additional embedded software conforming to US National Conference on Weighing & Measurement requirements for Class II balances - certified for both Weighing and Pill Counting for prescription filling. A&D offers an extensive line of pharmacy weighing solutions which comply with most Federal, State and local USP Regulations.
GF-300P Pharmacy [Read More ....] |
 |
 A&D Weighing GF-1200N Class 2 Scale |
Capacity: 1210g Readability: 0.01g
|
MSRP:$1500.00 Your_Price:$1155.00
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Pounds
- Ounces
- Grams
- Troy Ounces
|
GF1200N NTEP Class II Scale offers the same reliability as the GF-1200 digital balance with additional embedded software conforming to US National Conference on Weighing & Measurement requirements for Class II balances. A&D offers an extensive line of pharmacy weighing solutions which comply with most Federal, State and local USP Regulations. The A&D GF1200N can be calibrated externally only and requires t [Read More ....] |
 |
 A&D Weighing GF-2000N Class II Balance |
Capacity: 2100g Readability: 0.01g
|
MSRP:$1540.00 Your_Price:$1186.00
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Pounds
- Ounces
- Grams
- Troy Ounces
|
GF2000N Class 2 NTEP Approved Balance offers the same reliability as the GF2000 lab balance with additional embedded software conforming to US National Conference on Weighing & Measurement requirements for Class II balances - certified for both weighing and filling applications. A&D offers an extensive line of legal for trade weighing solutions which comply with most Federal, State and local USP Regulations. [Read More ....] |
 |
 A&D Weighing GF-3000N NTEP Scale |
Capacity: 3100g Readability: 0.01g
|
MSRP:$1770.00 Your_Price:$1327.50
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Pounds
- Ounces
- Grams
- Troy Ounces
|
GF-3000N Certified offers the same reliability as the GF-3000 lab balance with additional embedded software conforming to US National Conference on Weighing & Measurement requirements for Class II balances - certified for weighing and. A&D offers an extensive line of Class II Approved digital scale which comply with most Federal, State and local USP Regulations
Fast, [Read More ....] |
 |
 Sartorius Pharmacy Balance GD503 |
Capacity: 100g Readability: 0.0001g
|
MSRP:$1995.00 Your_Price:$1429.00
|
FEATURES:
|
WEIGH MODES:
|
The Sartorius GD503 has been discontinued and no longer in production as of May 2013. The Sartorius GD503 was phased-out and at this time there is no direct replacement under the Sartorius brand. Many pharmacies have purchased the AND FX-200iN or FX-300iN as an alternative, although these models are only 3 decimal places. We have no remaining stock on the GD503 and [Read More ....] |
 |
 Ohaus AX423N NTEP Class II Int Cal |
Capacity: 420g Readability: 0.001g
|
MSRP:$2476.00 Your_Price:$2104.60
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- Internal Calibration
- USB
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Carats
- Grains
- Milligrams
- Ounces
- Pennyweight
- Grams
- Troy Ounces
|
Ohaus Adventurer AX423N is the same model as the AX423N/E except the AX423N has motorized internal calibration, while the AX423N/E is external calibration only.
Legal for Trade Class II precision balance offers 420g with 0.001 gram readability. The “d” (value of scale division) is 0.001 grams and the “e” (value of verification scale division) is 0.01 grams. The balance meets the requirem [Read More ....] |
 |
 Scientech ZSP400NP Pharmacy Balance |
Capacity: 400g Readability: 0.001g
|
MSRP:$1895.00 Your_Price:$1544.00
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- NTEP Class II
|
WEIGH MODES:
- Carats
- Ounces
- Pennyweight
- Grams
- Troy Ounces
|
Scientech ZSP400NP is a pharmaceutical
scale that can weigh to 1mg each and every time with little effort. In
addition, it is a very hardy scale that is very resistant to damage or abuse.
Why settle for less with a foreign made product when you can have all this plus
be able to talk with the manufacturer right here in the USA. The ZSP-400NP
gem balance is legal for trade at a 0.01 g readability, but also offers a 0.001 readability [Read More ....] |
 |
 Ohaus AX224N Class I NTEP |
Capacity: 220g Readability: 0.0001g
|
MSRP:$3962.00 Your_Price:$3367.70
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- Internal Calibration
- USB
- NTEP Class I
- Below Weighing
|
WEIGH MODES:
- Carats
- Grains
- Milligrams
- Ounces
- Pennyweight
- Grams
- Troy Ounces
|
Ohaus Adventurer AX224N is a Legal for Trade Class 1 precision balance offers 220g with 0.0001 gram readability. The “d” (value of scale division) is 0.0001 grams and the “e” (value of verification scale division) is 0.001 grams. The balance meets the requirements as a Class I weighing device as defined by Handbook 44 and complies with the applicable technical requirements of "NIST Handbook 44: Specifications, Tolerances and Other Technical Requirements for Weighing and M [Read More ....] |
 |
 Ohaus AX223N/E Class II Ext Cal |
Capacity: 220g Readability: 0.001g
|
MSRP:$1804.00 Your_Price:$1533.40
|
FEATURES:
- Legal For Trade
- Parts Counting
- RS-232c
- Internal Calibration
- USB
- NTEP Class II
- Below Weighing
|
WEIGH MODES:
- Carats
- Grains
- Milligrams
- Ounces
- Pennyweight
- Grams
- Troy Ounces
|
Ohaus Adventurer AX223N/E is a Legal for Trade Class II precision balance offers 220g with 0.001 gram readability. The “d” (value of scale division) is 0.001 grams and the “e” (value of verification scale division) is 0.01 grams. The balance meets the requirements as a Class II weighing device as defined by Handbook 44 and complies with the applicable technical requirements of "NIST Handbook 44: Specifications, Tolerances and Other Technical Requirements for Weighing [Read More ....] |
 |
 |
 |
1 2 Next Page of Digital Scales |
Page 1 of 2
|
|